200W DALI/PWM 2-CHANNEL LED DRIVER

MU200S024BPI500 MOON'S
Share

  • MOONS' MU200S024BPI500 intelligent 200W two-channel constant-voltage LED driver for 24V LED strips, with DALI-2 and PWM control.
  • 24V DC output +/-2% by default, adjustable from 23 to 25V; output current range 0-8300mA.
  • Maximum 200W per channel, subject to a combined total power limit of 200W across both channels.
  • Selectable DT8 CCT, DT6 CCT, DT6 Solo and DT6 Dual control logic; common-anode connection.
  • DALI and PWM dimming from 0.1% to 100% in logarithmic mode or 0.4% to 100% in linear mode.
  • Output PWM frequency 22kHz above 5% output and 3.5kHz below 1% output.
  • 90-266V AC input range, rated for 100-242V AC at 47-63Hz; typical efficiency 92% at 242V AC and 87.5% at 100V AC.
  • Active power-factor correction; power factor above 0.90 at 70-100% load under the stated input conditions.
  • Parameters programmed by cable through the Smartkey Network; short-circuit, overvoltage, overcurrent, overpower and over-temperature protection.
  • IP67 housing for indoor or outdoor installation, measuring 251 x 67.5 x 51mm, weight 1.32kg; operating temperature -35 deg C to +50 deg C.
  • Life expectancy 50,000 hours at ambient temperature +40 deg C. Capacitive loads are not supported; active constant-current loads require compatibility testing.

  • Reference
    MU200S024BPI500
  • Condition
    New

DATASHEET

DATASHEET - LIGHT AND SMART -Specification-MU200S024BPI500-B2.pdf

Download (1.14MB)

16 other products in the same category

Viewed products

Comments (0)

No customer reviews for the moment.
Loading...
Back to top