MOONS' MU050S150BQI911 intelligent 50W two-channel LED driver with integrated Casambi wireless control and Lensvector liquid crystal lens driver for beam shaping.
Constant-current output from 200 to 1500mA with an 8-50V DC operating window; constant-voltage mode from 8 to 50V is supported with firmware V4.18 and later.
Maximum 50W per channel, subject to a combined output power limit of 50W.
Tunable White, Dual and Solo modes; 0.1-100% dimming, dim to off, and selectable linear, logarithmic, gamma and square curves.
Wireless parameter programming via the MOONS' Touch setting tool and Casambi wireless dimming; communication distance at least 50m in open air.
Integrated two-channel beam-shaping output, 0-24V per channel at 105Hz +/-1Hz, supporting circular and oval beam shapes.
90-305V AC input, rated for 100-277V AC at 50/60Hz; typical efficiency 87% at 230V AC and power factor above 0.96 at 230V AC and full load.
Standby power below 0.5W; integrated 12V/100mA auxiliary supply.
Open-circuit, short-circuit and over-temperature protection, with automatic recovery for short circuits and over-temperature events.
IP20 housing measuring 130 x 76 x 30mm, weight 375g; operating temperature -25 deg C to +50 deg C.
Rated lifetime above 50,000 hours at Tc 70 deg C and full load.
Reference
MU050S150BQI911
Condition
New
DATASHEET
DATASHEET - LIGHT AND SMART -Specification-MU050S150BQI911.pdf