20W DALI 2-CHANNEL LED DRIVER

PU020S105BQI5920 MOON'S
Share

  • MOONS' PU020S105BQI5920 intelligent 20W two-channel constant-current LED driver with DALI dimming.
  • Programmable output current from 150-1050mA with an 8-54V DC operating window, subject to a maximum combined output power of 20W.
  • Selectable DT8 CCT, DT6 CCT, DT6 Solo address and DT6 Dual addresses modes for Tunable White and brightness control.
  • Deep dimming from 0.1% to 100% with selectable logarithmic or linear curves and flicker-free operation across the full range.
  • Wireless parameter programming via the MOONS' Touch setting tool; lighting control uses the DALI interface.
  • Integrated DALI bus power supply: 15V DC +/-30%, below 56mA.
  • Input power measurement accuracy: 5% of the measured value or 0.5W, whichever is greater.
  • 90-305V AC input range, rated for 100-277V AC at 50/60Hz; typical efficiency 84% at 230V AC and power factor above 0.9 at 100-277V AC and 50-100% load.
  • Standby power below 0.2W with auxiliary and DALI bus power disabled where fitted; DALI startup time 540-660ms under the stated datasheet conditions.
  • IP20 housing measuring 109 x 41 x 27mm; operating temperature from -40 deg C to +40 deg C.
  • Rated lifetime above 50,000 hours at Tc 82 deg C and full load.

  • Reference
    PU020S105BQI5920
  • Condition
    New

DATASHEET

DATASHEET - LIGHT AND SMART -Specification-PU020S105BQI5920-B1.pdf

Download (956.57KB)

16 other products in the same category

Comments (0)

No customer reviews for the moment.
Loading...
Back to top